rz_plastocor_inter_60_years_sw.jpg

Why use plastocor® P400 coating systems?

100% solids non-VOC coatings

custom made soultions

repair and protection

coating_5.jpg

We provide custom made solutions for you problems. Just send us a description of your problem.

P400 coating systems are suitable for the use in:

Entire cooling water cycle (heat exchangers, water boxes, tanks, cooling water piping)

Food industry

Tanks circulating water inflow structures

Containments

FGD systems

Desalination plants

Wind Tower (splash zones, nacelles, blades, foundations)

Condenser Waterboxes, Heat Exchanger Channel Heads, and Circulating Water Piping Tunnels

The plastocor® system for carbon steel structures consists of a high performance, epoxy liner installed from 600 to 3'125 microns in thickness. Thicker applications can be supplied where rebuilding of corroded surfaces or a "bullet proof" lining is required.

Condenser Waterboxes and Circulating Water Piping Made of Cast Iron

The restoration of severely corroded cast iron is one of our specialties. Special procedures have been established for the degraphitization, decontamination, fairing, patching, and lining of cast iron structures.

Circulation Water Piping and Tunnels Made of Concrete

We will supply and apply special products for the decontamination, sealing, rebuilding and patching of concrete prior to the application of a high performance epoxy coating. Advanced products and procedures are employed for crack repair and treatment of other seams.

Exact! | cmsbox